48V8.8Ah-13.6Ah electric bike battery rear rack style case
NO |
Item |
General Parameter |
Remark |
| 1 |
Model |
BB-EBRC48V-5 |
|
| 2 |
Standard capacity(0.5C) |
8.8-13.6Ah |
|
| 3 |
Rated voltage |
48V |
|
| 4 |
Max. charge voltage |
54.6V |
Single Ave. charge Voltage: 4.2V |
| 5 |
Over charge protection
|
Over charge detection voltage |
4.40±0.025V |
|
| Over charge release voltage |
4.3±0.025V |
|
| 6 |
Standard charge current |
3A |
0.2C |
| 7 |
Charging time |
About 300 minutes |
X C |
| 8 |
Discharge cut-off voltage |
36.4V |
Single Ave. Discharge Voltage: 2.75V |
| 9 |
Over discharge Protection
|
Over discharge detection voltage |
2.5±0.05V |
|
| Over discharge release voltage |
2.75±0.05V |
|
| 10 |
Max. continuous discharge current |
15A(adjustable) |
1.5C |
| 11 |
Peak discharge current |
45A(adjustable) |
4.5C |
| 12 |
Short circuit protection |
Detetion delay time |
XXμs |
Release condition |
Cut-off load |
| 12 |
Battery dimension |
390*148*55mm |
|
| 13 |
Total weight(Approx.) |
About 3.5kg |
|
| 14 |
Operation temperature |
Standard |
0~45 |
|
| Discharge |
-20~65 |
|
| Storage |
-20~65 |
|
52PCS 18650 Cylinder cells, capacity 36V10Ah-17Ah or 48V8AH-13.6AH
DC2.1 charging Port (optional 5Pin high current charging Plug)
Four levers LED capacity indicator
30Amps high performance blade type discharge fuse
6Pins discharging plug with nickel-plating
Waterproof grade: IP65
Integrated with Spanninga Lineo rear light
1.Instruction of the Battery Pack Structure
(1)Battery modules
52 cells,4 parallel and 13 serial to make a battery module.
(2)Protective board
The protective board, provides protection against overcharge, and short circuit, through monitoring
single string of cells. Also it enables every battery pack to obtain independent balancing function
(3)Charge/discharge standards for cell
Cell adopted: ICR3.7V2200mAh
Constant charge current: 0.2 C5A -1 C3A is the best. cell max voltage<4.3V.
Constant discharge current: single cell min voltage> 2.75V
Rapid charge capability: Max. charge current1C3A;temperature increase falls within 15°C is
normal while over 15°C will affect the cycle life of cell.
2.Storage and Transportation
(1)Based on the characters of cells, proper environment for transportation of battery pack need to be created to protect the battery.
(2)During transportation,50% SOC must be kept to ensure that short circuit, appearance of liquid in the battery or immersion of battery in liquid never occur.
(3)Battery should be kept at -20ºC~45ºC in warehouse where it is dry, clean and well-ventilated.
(4)During loading of battery, attention must be paid against dropping, turning over and serious
stacking.
3. Warnings and Tips
In order to prevent the battery leaking, getting hot and exploding, please pay attention to preventing
measure as following:
Never throw the battery into water, keep it under dry, shady and cool circumstance when not use.
Never upside down the positive and negative.
Never connect the positive and negative of battery with metal.
Never ship or store the battery together with metal
Never knock, throw or trample the battery.
Never cut through the battery with nail or other edge tool.
Notices!
Never use or keep the battery under the high temperature. Otherwise it will cause battery heat, get into fire or lose some function and reduce the life. The proposed temperature for long-term storage is 10-45ºC.
Company Information:
Shenzhen Chixia industry Co., Limited is a professional battery manufacturer of lithium batteries in China ,including : LiFePO4, LiMn2O4, LiNiCoMnO2 and LiCoO2 batteries. Products are widely applicable to E-bikes, E-motorcycles, EVs, golf carts, lawn mowers, electric tools and toys, portable power supply, safe mining equipments, UPS, telecommunication backup power, photovoltaic and wind power storage, etc.
All of our products will be strictly tested before delivering out .We also offer OEM & OEM service.
You are always welcome to visit our factory and cooperate with us!
Audited Supplier 
){kind=link}
){kind=link}